OUR RUGGEDIZED EXTERNAL INDUSTRIAL CELLULAR & MESH MODEM, STARMOD

StarMod is an industrial-grade external modem designed to connect commercial and industrial (C&I) electricity meters, distribution transformers, solar inverters, and remote SCADA RTUs to central utility monitoring platforms.

Key Features & Architecture

Multi-Band 4G LTE & NB-IoT

Global cellular coverage supporting 4G LTE with 3G/2G fallback and low-power NB-IoT for difficult RF locations.

Last-Gasp Supercapacitor

Dispatches immediate power loss and phase outage distress messages to the HES when mains electricity fails.

Dual-SIM Automated Failover

Automatically switches between telecom operators if primary cellular connection drops or degrades.

Transparent Serial Tunneling

Tunnels DLMS/COSEM, Modbus RTU, and IEC 60870 serial communications over secure IPsec/TLS connections.

Wide Operating Voltage Input

Accepts 85-265V AC / 100-375V DC directly from transformer phases without needing external step-down supplies.

Enclosed in a flame-retardant IP54 casing, StarMod features optical and RS-485 serial ports, dual-SIM cellular redundancy, and a high-temperature supercapacitor providing last-gasp outage notifications during power failures.

StarMod Industrial External Cellular and Mesh Modem

Substation & C&I Metering Gateway Architecture

High-revenue commercial and industrial metering points demand uncompromised communication availability. StarMod combines hardware watchdog timers, automated connection recovery, and carrier-grade surge protection.

Configured remotely over-the-air, StarMod provides real-time signal diagnostics, bandwidth tracking, and secure SSH tunnels for remote meter maintenance and diagnostic reading sessions.

  • Global 4G LTE / NB-IoT
  • Supercapacitor Last-Gasp
  • Dual-SIM Redundancy
  • RS-485 / RS-232 / Optical
  • Wide AC/DC Power Range
  • IP54 Weatherproof Case

Dependable industrial cellular telemetry for mission-critical grid assets and commercial substations.

Telemetry Acquisition & Uplink Workflow

STEP 01

Serial Bus Interrogation

StarMod polls connected meters or RTUs via RS-485 or optical probe at scheduled intervals.

STEP 02

Encrypted Encapsulation

Raw meter frames are packed into secure TCP/IP or MQTT payloads with TLS 1.3 encryption.

STEP 03

Cellular Cloud Push

Packets are dispatched over private APN to utility MDMS and HES enterprise servers.

C&I Telemetry Uptime & Commercial ROI

Operational Metrics & Parameters

  • Commercial Meter Uptime: 99.95% Network Availability
  • Power Outage Detection Speed: < 2 Seconds to Cloud
  • Remote Configuration Truck Rolls: Reduced by 85%
  • Dual-SIM Failover Time: < 10 Seconds

Supported Protocols & Industrial Standards

Engineered to interface with all leading commercial energy meters and industrial RTUs:

  • DLMS/COSEM TCP / HDLC
  • Modbus RTU / TCP
  • DNP3 Protocol
  • IPsec & OpenVPN Tunnels
  • CE & FCC Industrial EMC
  • IEC 61000-4-5 Surge Level 4